10
Using the Optical Input
You will need: An audio source with an Optical Audio Output and a Digital Optical Audio
cable (not included)
1.
Connect the Digital Optical Audio cable to the optical output on the audio source and
to the
Optical Input
on the speaker bar.
2.
Press the
Power
button to power on the unit.
3.
Press the
Source
button repeatedly on the soundbar or press
Optical
on the remote
control to switch to SPDIF Mode, indicated by an amber light.
4.
Using the native controls on your connected device, make sure the audio settings are
set to PCM or Optical Audio and are turned On.
5.
Audio from the connected audio source will now be played through the speakers.
NOTE:
The Bluetooth Soundbar will automatically go into standby mode after 5 minutes without receiving any
audio signal.
Summary of Contents for 58666
Page 1: ...User manual Bluetooth Soundbar...
Page 2: ...2...