10
3. Connect the 24-pin color display shielded DVI-DVI signal cable to your signal
system device and lock both screws on the connector to ensure firm grounding.
The connector information is as follow:
15 - Pin Color Display Signal Cable
PIN NO.
DESCRIPTION
PI N NO.
DESCRIPTION
1.
TMDS Data 2-
13.
TMDS Data 3+
2.
TMDS Data 2+
14.
+5V Power
3.
TMDS Data 2/4 Shield
15.
Ground (for+5V)
4.
TMDS Data 4-
16.
Hot Plug Detect
5.
TMDS Data 4+
17.
TMDS Data 0-
6.
DDC Clock
18.
TMDS Data 0+
7.
DDC Data
19.
TMDS Data 0/5 Shield
8.
N.C.
20.
TMDS Data 5-
9.
TMDS Data 1-
21.
TMDS Data 5+
10.
TMDS Data 1+
22.
TMDS Clock Shield
11.
TMDS Data 1/3 Shield
23.
TMDS Clock +
12.
TMDS Data 3-
24.
TMDS Clock -
4. Apply power to the display by pressing the power key for about 2 second
consecutively and allow about several seconds for Panel warm-up. The Power-
On indicator lights up when the display is on.
5. With proper signals feed to the display, a pattern or data should appear on the
screen, adjust the brightness and contrast to the most pleasing display, or press
auto-key to get the factory preset best picture-quality.
6. This monitor has power saving function following the VESA DPMS. Be sure to
connect the signal cable to the PC.
7. If your LCD monitor requires service, it must be returned with the power cord &
Adapter.
Summary of Contents for EN9110
Page 27: ...26 7 MECHANICAL OF CABINET FRONT DIS ASSEMBLY...
Page 29: ...9 MAIN BOARD SCHEMATIC...
Page 58: ......
