Page
11
of
11
11. Press down the Coin Eject button several times to ensure that the mechanism is moving correctly.
12. You may now power on the Coin and Bill Acceptor at the Mains Power outlet. As the Coin
Acceptor performs it power-on Self-Test, ensure that the LCD displays shows an OK status instead
of a diagnostic error. Once the Self-Test has completed the LCD display should alternate between
Status OK (with the approximate change level/Value) and Float Disabled. If any errors are
displayed then please repeat the steps above to ensure that no steps were missed and the unit was
not incorrectly assembled. If an error still exists then please contact EnvisionWare Support for
further assistance.
