Envision One D4K PRO Original Instructions Manual Download Page 45

Page: 45 / 52

D4K Pro® User Manual

www.envisiontec.com

D4K_UserManual_v1.3_EN.docx, 2021-02-12

Page 45 of 52

Service and Maintenance

WARNING!

Risk of injury!

Risk of injury from crushing caused by automatically moving printer parts.

Body parts may be crushed by movements of the build platform.

•

The printer may only be operated if the protecting devices are working properly.

WARNING!

Risk of injury!

Risk of slipping, stumbling or falling of persons through loose cables, objects or liquids on the floor.

•

Keep the printer area clean and dry.

•

Make sure that no loose cables or objects are lying on the floor of the printer area.

•

Place all printer cables carefully to prevent trip hazard.

•

After repairing the printer, place cables back carefully to prevent trip hazard.

•

Remove tools and other objects from the printer.

•

Inform the personnel of residual risks.

CAUTION!

Risk of injury!

Residual risks caused by the ergonomics of the printer.

•

Maintain a healthy posture.

•

Instruct the personnel accordingly.

The following sections contain information on service and maintenance of the printer. A regular maintenance according to the

maintenance plan is an essential precondition for an efficient use of the printer.

•

Section

Operational Maintenance

describes the operational maintenance and how to carry out the maintenance tasks.

•

Section

Auxiliary Materials and Consumables

gives an overview of all auxiliary materials and consumables.

12.1

Customer Service

EnvisionTEC GmbH

Brüsseler Str. 51

D-45968 Gladbeck

Germany

Phone

: 49 2043 9875-0 (This phone number is available only during office hours).

E-mail

: [email protected]

12.2

Operational Maintenance

IMPORTANT

Carry out the maintenance tasks according to the table below and the intervals specified therein.

NOTICE

The execution of maintenance activities, including date and performing operator, shall be documented due to

traceability.

The operational maintenance helps ensuring a smooth and efficient production process. The operating personnel can carry out

these tasks after being trained accordingly.

Task

Maintenance Interval

Cleaning the build platform

Print-by-Print

Cleaning the material tray

Print-by-Print

Cleaning the printer casing

Print-by-Print

Cleaning the hard drive space

Weekly

Cleaning the PWA 2000 or Washing Containers

Weekly

Summary of Contents for D4K PRO





















































Search results

Summary of Contents for D4K PRO

Reviews:

Related manuals for D4K PRO

Brands by name

Popular brands

Envision One D4K PRO, Original Instructions Manual

Search results

Summary of Contents for D4K PRO

Reviews:

Related manuals for D4K PRO

Brands by name

Popular brands