Envirovent PROFILE-100, Installation And Wiring Instructions

Page: 2 / 12

PROFILE-100 AXIAL EXTRACTOR FANS
Suitable for bathroom applications
Thank you for placing your confidence in EnviroVent by buying this product. It
has been manufactured following current technical safety regulations, production
and quality standards as laid down by the international Quality Standard ISO
9001. Please read this instruction booklet carefully before installing or starting up
the product. It contains important information on personal and user safety
measures to be followed whilst installing, using and carrying out maintenance
work on the equipment. Once the product has been installed, please pass this
booklet to the end user.
Check that the product is in perfect condition while unpacking. Any fault or
damage caused in origin is covered by the EnviroVent guarantee. Please make
sure that the product corresponds to the one you have ordered and that the
details on the instruction plate fulfil your requirements.
IMPORTANT:
BE SURE TO HAVE READ AND UNDERSTOOD THESE INSTRUCTIONS
BEFORE BEGINNING THE INSTALLATION PROCESS
SAFETY AND RECOMMENDATIONS

All wiring must comply with Building Regulations and the current I.E.E. Wiring
Regulations (BS7671) or the equivalent standards for your country.
The final installation should be examined and tested by a competent person.
This fan is IP44 rated.

Do not install near sources of heat in excess of 40°C.

Position the fan at the furthest distance from the main source of air
replacement in the room in order to achieve maximum airflow performance.

This appliance is not intended for use by young children or infirm persons
unless they have been adequately supervised by a responsible person to
ensure that they can use the appliance safely. Young children should be
supervised to ensure that they do not play with the appliance.