background image

PIV & MIV

®

 Loft Mounted Unit

INSTALLATION INSTRUCTIONS

IMPORTANT

Be sure to have read and understood these 

instructions before beginning the installation 

process.

Smoke Detectors

It is important that any open side of the plastic 

diffuser  is  not  positioned  within  1m  of  a  smoke 

detector.  If  the  diffuser  cannot  be  repositioned, 

up  to  two  sides  of  the  diffuser  may  be  closed 

off using the plastic blanking plate supplied (Loft 

only) so that the open sides face a minimum 1.5m 

unobstructed path away from the detector. In 3 

floor  properties  a  metal  fire  diffuser  should  be 

fitted  at  minimum  of  1m  from  the  detector  (see 

page 8).

SAFETY AND RECOMMENDATIONS

•  All wiring must comply with Building 

Regulations and the current I.E.E. Wiring 

Regulations  (BS7671)  or  the  equivalent 

standards for your country. The final installation 

should be examined and tested by a qualified 

electrician.

•  Precautions must be taken to avoid the back-

flow of gases into the dwelling from the open 

flue of gas or other fuel-burning appliances.

•  Make sure the mains supply complies with the 

rating label for voltage, frequency and phase.

•  This appliance can be used by children aged 

from 8 years and above and persons with 

reduced physical, sensory or mental capabilities 

or lack of experience and knowledge if they 

have been given supervision or instruction 

concerning use of the appliance in a safe way 

and understand the hazards involved. Children 

shall not play with the appliance. Cleaning 

and user maintenance shall not be made by 

children without supervision.

03

Summary of Contents for MIV

















Reviews: