15
energiSava
®
325
SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING
THIS UNIT, CALL US ON:
0345 27 27 810
Maintenance
Filter Replacement
Filters should be replaced at least annually, or more regularly dependent on environmental
conditions. The status indicator will indicate filter change required in line with the filter change
interval setting. Replacement filters are available from EnviroVent.
energiSava
®
325 filters are available in two grades G3 and G4. Filter media should be replaced
like for like. Filter part numbers in table below.
G3 Filters
Both faces white
G4 Filters
One face white, one face blue
G3 Filter Set
2 framed filters
FILTER-G3-ES325
G4 Filter Set
2 framed filters
FILTER-G4-ES325
How to Change Filters
1. Remove front cover or filter covers.
2. Slide out filters.
3. The energiSava
®
325 filters uses unequal
filters. Make a note of which side of the
unit the filter with the shorter filter media
is. The positions of filters is marked on
the unit.
4. Replace filters by carefully sliding in the
replacement filters. Ensure that filters are
replaced in the same positions as they
were removed. The positions of filters is
marked on the units.
5. Replace the front cover or filter covers.
Shorter Media Filter
Status Indicator Filter Notification Reset
Ensure the unit is powered up. To clear the
status indicator filter notification press &
hold the reset switch with a ball point pen
or similar object for 10 seconds. The switch
is located behind the small hole in the
front of the status indicator. All lights will
momentarily be illuminated indicating a
successful reset.
