4.4.7.3 SET THE TEMPERATURE
NOTE!
The temperature can only be set before the start of the pre-conditioning. When the container is pre-
conditioned, the set temperature is locked and cannot be changed. To restart the temperature setting, the
temperature control needs to be shut-off. Refer to
4.4.7.6 Turn the temperature control off
.
1.
On the shipment status overview, press
to enter
Container Settings
.
2.
Select
Set Temperature
.
NOTE!
The
Set Temperature
screen is active for one minute. If the display returns to the shipment status
overview before the new set temperature has been confirmed, the setting is not saved.
3.
Set the applicable temperature using
and
.
4.
Press
to confirm the temperature setting.
4.4.7.4 CHECK THE BATTERY LEVEL
Fig. 31
The battery level is shown on the shipment status overview.
If the display is in sleep mode, press any button to wake it
up.
Note that the remaining operating time varies depending on
the set temperature and the ambient conditions. The
operating time increases if the ambient temperature is close
to the container set temperature.
For information about operating time, refer to
.
29 (40)
Doc No:
UM-RLP-1000
Revision:
5
State:
Released
Release Date:
2021-02-16
Approved By:
hanst