background image

Copyright EnvironmentalLights.com 

   

All Rights Reserved 10/20/15 

12 

Controller Capacities 

The chart below lists the maximum recommended branch length limit of lights for each of the 
controllers. Please remember that if the branch length limit is exceeded, the lights will be 
dimmer towards the end of the branch. 

 

Troubleshooting 

A)

 

Christmas Lights fail to light up or do not remain lit for long enough. 

If the Christmas Light Strings fail to light up, please check the following: 

 

Connectivity: Confirm that the first connector from the solar panel to the LEDs is 
properly and securely connected, and all connectors in the same branch are also securely 
connected. Make sure that the key for each connector is lined up between the male and 
female connectors before they are connected. 

 

 

Battery Charge: Confirm that the solar panel is getting enough sunlight throughout the 
day, make sure it is facing south and positioned at an angle of 20-30 degrees. There 
should be at least 8 hours of direct sunlight exposure each day for the battery to be fully 
charged and turn the lights on for 6 hours each night. 

 

Lighting Conditions: Confirm that the solar panel is in a completely dark environment. 
The solar panel’s ambient light sensor is on the front of the panel and the lights will turn 
off in a few seconds if the solar panel’s ambient light sensor senses flux greater than 100 
lux. The lights will only stay on at night time so to test, you can simply put the front of 
the panel face down on a flat surface to prevent any light from getting to the light sensor. 
Then press the button to turn the lights on. If they stay on when the front panel is faced 
down, then this means that the ambient light sensor detects light greater than 100 lux 
where the panel is currently located. Try moving the solar panel further away from the 

Controller

Part #

Capacity 

(Watts)

LEDs per 

string

Max LEDs 

Per Branch

Max Strings 

Per Branch

Power per 

string (Watts)

Solar Panel

solar-panel-1200-mah

1.41      

100      

800      

8      

0.8   

Compact Battery Box

solar-battop-ctrl-1

0.71      

100      

400      

4      

0.8   

Battery Box

solar-battop-ctrl-2

0.40      

100      

600      

6      

0.8   

Plug-In Power Adapter solar-adapt

7.99      

100      

1,000      

10      

0.8   

Plug-In Power Adapter 
with Infrared Remote

solar-adapt-ir

4.92      

100      

1,000      

10      

0.8   

Summary of Contents for solar-panel-1200-mah














Reviews: