pH set up
19
Setup
This section describes all the setup functions available in OAKTON PH200 series Handheld
meters.
P1 pH setup
Using P1 pH setup function of the meter, you can:
Select buffer standard
Set calibration alarm
Erase calibration data
To set the pH functions using OAKTON PH200 series Handheld meters, follow the procedure
detailed below:
Prerequisites
Switch on the pH meter.
Default buffer setup is
BUFF USA
. You can change it to
BUFF NIST
or
BUFF DIN
if
required.
Calibration alarm setup option must be used to avoid Calibration interval alarm error on
page 38. You can set the calibration alarm for ---- day to upto 90 days, where ----
indicates no calibration alarm has been set.
Erasing previous calibration data is recommended for accurate calibration. Default setup is
NO
but to erase the calibration data, you need to change the setup to
YES
.
To return to the measurement mode, press the
key.
Note
Tip
www.
GlobalTestSupply
.com
Find Quality Products Online at: