PULSE OXIMETER
ROBD2 USER’S GUIDE SEPTEMBER 2016
32
Adjusting the alarm and pulse bar volume
To change the pulse bar, pulse alarm, and SpO2 alarm volumes, press Set
Volume. Each time that field is pressed, the new variable to adjust will appear.
Once on the desired variable, press the up or down arrow key. The value setting
will flash on the screen and the beeper will beep to the new volume level. The
pulse bar volume and both alarm volumes are factory set to 1; the lowest audible
volume. To indefinitely disable the volume for either of these setting, set the
volume to zero.
