Pelican PR-5SC 5-Stage
Whole House Filter/Softener Combo
© 2015 Enviro Water Solutions LLC
3060 Performance Circle, Suite 2. DeLand, FL 32724
PR-5SC Rev A
Page 13
www.pelicanwaterretail.com/
Complete the Installation
1. Check for leaks.
2. Add the Pelican logo sticker in the desired location on the tank.
3. Wax stainless steel tank jacket(s) with wax provided or any other non-abrasive auto wax a
minimum of 1-2 times per year or as needed based on the installed environment.
CAUTION:
Avoid high flow rates such as bathtub, utility sinks, hose bibs, multi-headed showers, body sprayers, or
anything that is considered high flow for the first 72 hours to avoid flow restrictions caused by carbon
blockage of the top basket inside the carbon tank.
Carbon dust may be released into the water lines of the house/building during the first few days of water
use after carbon tank installation. The carbon dust is harmless, but may give the water a gray appearance
that should diminish within 7 - 10 days depending on water use.
Clean Your Hot Water Heater (optional)
Cleaning and restoring the plumbing system is a major benefit of the NaturSoft system. In order to
minimize the time required to complete the de-scaling process (the dissolving of mineral deposits in the
plumbing), we strongly recommend cleaning your hot water heater after a period of 3 weeks:
Turn off the heat source, attach a hose to the drain valve at the bottom of the tank and flush the
heater by opening the drain valve.
Close the drain valve and refill the tank with water. After the water heater is completely filled with
water, turn the heat source back on.
Alternatively, open several fixtures in the home and let water run simultaneously for a couple of
minutes. Focus on the hot water side and high flows like the bathtubs. This method is not quite as
effective.