4
USING YOUR BLENDER
Before the first use, clean the blender according to the section of “quick
cleaning”.
The time running unit without load can’t exceed 15s.
Important:
Blades are very sharp, handle with care. Ensure that the
hand-held blender is unplugged from the power outlet before assembling or
removing attachments.
INSTRUCTION FOR BLENDER
Max operation duration per time cannot exceed 1 minute, and 3 minute rest
time must be maintained at two consecutive cycles.
1. To assemble the detachable shaft with the motor unit, turn the shaft
anti-clockwise direction until tightened. To disassemble, just turn in the
adverse direction.
2. Simply plug the hand-held blender to power outlet.
3. Lower the hand-held blender into food. Then press and hold the low speed
button to start operating. At the same time you can select desired speed
setting by dialing the speed control dial, the speed will be higher gradually
when you dial the speed control dial from left to right.
4. You also can start operating by pr essing and hold the high speed button
(turbo button), the appliance will operate at the highest speed all the time.
The speed will not change even if you dial the speed control dial.
5. To stop the hand-held blender by releasing the low speed button or high
speed button.
INSTRUCTION FOR CHOPPER
Max operation duration per time cannot exceed 1 minute, and 3 minute rest
time must be maintained at two consecutive cycles.
1. Place the chopper bowl on a clean, level surface.
2. Assemble the stainless chopping blade into the chopper bowl, as shown in
Fig.1.