17
m
eDia
t
Ray
R
emoVaL
:
1. Remove the surround panel (see
m
aIntenance
anD
s
erVIce
- s
urrounD
P
anel
r
emoVal
).
2. Remove the door cover (see
m
aIntenance
anD
s
erVIce
- D
oor
c
oVer
r
emoVal
).
3. Remove the glass door (see
m
aIntenance
anD
s
erVIce
- g
lass
D
oor
r
emoVal
)
4. Remove glass media (if installed).
Maintenance And Service
Figure 19. Front Burner Removal
Figure 20. Rear Burner Removal
R
eaR
b
uRneR
R
emoVaL
:
The burners will need to be removed for maintenance and fuel conversion. Follow the procedure carefully.
Proceed only when the unit has completely cooled down.
5. Remove the upper tray hat by removing the
two (2) upper T-20 screws.
6. Remove the four (4) remaining T-20 screws
securing the glass media tray (see Figure
19). Lift up and out.
To re-install the burners, follow steps above
in reverse. When placing the burners back in
the unit be sure not to move the air shutter.
Do not over tighten the burner screws or
they might strip; just get them snug.
1. Remove the glass media tray (see
m
aIntenance
anD
s
erVIce
- m
eDIa
t
ray
r
emoVal
).
2. Remove the eight (8) appropriate T-20 screws securing the burner. Lift burner up and out. The remaining
T-20 screws in the burner do not need to be removed.
Summary of Contents for G42GI
Page 53: ...53 Parts Diagram 1 2 3 4 5 6 12 7 8 11 10 9 ...
Page 54: ...54 Notes ...