Secondary Installation
Figure 44: Shows the
back log
plus the
two
(2) small log twigs
. Put the large
back log in first, making sure the locator
pins line up with the cutout sections on the
log. There are two (2) pins with ledges and
a single ledge on the back log. The back log
sits on two (2) supports attached at the rear
of the firebox. The two (2) small twigs are
placed under the grate and they should be
rotated so they cover up the least number of
small burner ports.
Figure 45: Shows the left/center log in
place. The
left/center
log is placed on the
other two (2) pins connected to the burner
pan and the straight part rests on the grate
connecting the andirons. There are notches
on the bottom of the left/center log to help
position the log correctly.
Figure 46: The
right log
rests on the right
pin and ledge of the back log and the floor
of the firebox.
Figure 44: First Stage Log Set Installation.
Figure 45: Second Stage Log Set Installation.
Figure 46: Third Stage Log Set Installation.
32
