7.3 Alarm Param. Set:
ENVIRO TECHNOLOGY
>>
AlarmParParam.Set
. Set
Temperature Alarm
Steps:
Can be use to set Temperature alarm set point and hysteresis of channel 1 to channel 8.also can set
humidity alarm set point and hysteresis of channel 9 to channel 16.
Go to this parameter using SEL key and set Temperature set point using increment decrement key.
Press ENTER to save those values.
Then put hysteresis and press enter key.
Do same procedure for humidity settings.
Temperature max range:- -200°C to 850°C.
Humidity range:-1) for EE_1V=0 to 1 V
2)
For Humidity= 0 to 3.3V.
7.4 Calibration offset:
ENVIRO TECHNOLOGY
>>Calibration Offset
Channel No: 01
Cal. Offset : 00.0
Steps:
Can set calibration offset channelwise.
Press SEL and go to calibration offset menu.
Set offset and press enter.
Can set calibration offset or user offset upto 99.9
7.5 Contrast Control:
ENVIRO TECHNOLOGY
>>Contrast Control
15
Steps:
To set contrast of display from 0 to 25.
Go to Contrast Control menu set contrast using increment/decrement keys.
Press Enter and save it.
7 of 10
Summary of Contents for 0202SCAN01
Page 1: ...Manual V1 2 Thermoscan...
Page 4: ...2 of 10...