Enviro Cams TOP MAST 30, User Manual

Page: 2 / 21

WARNING!
Installation and removal of the unit and its accessories must be carried
out by qualified personnel.
You must read all of the Safety Instructions supplied with your equipment
before installation and operation.
If the product does not work properly, please contact your dealer. Never attempt to
disassemble the camera yourself. (We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.)
• To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.
• This installation should be made by a qualified service person and should conform to all
the local codes.
• Please make sure that the ceiling can support more than SO(N) Newton gravities if the
camera is fixed to the ceiling.
• Make sure the power supply voltage is correct before using the camera.
• Do not drop the camera or subject it to physical shock.
• Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a
bit of ethanol and wipe it gently. If the camera will not be used for an extended period of
time, put on the lens cap to protect the sensor from dirt.
• Do not aim the camera lens at the strong light such as sun or incandescent lamp. The
strong light can cause fatal damage to the camera.
• The sensor may be burned out by a laser beam, so when any laser equipment is being
used.make sure that the surface of the sensor not be exposed to the laser beam.
• While shipping, the camera should be packed in its original packing.