PIXELATOR MINI (70066)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
7
|
ID: 1585589
Document Updated: June 2021
Home
The landing page for the PIXELATOR MINI web interface is the Home tab. This tab is designed to give you a
read-only device overview.
This will display:
Settings / Firmware Update
The PIXELATOR MINI’s settings can be configured within the Settings tab.
Node Name:
The name the PIXELATOR MINI will be
discoverable with in Poll replies.
DHCP:
Enabled by default. When enabled, the DHCP server
on the network is expected to automatically provide the IP
address to the PIXELATOR MINI. If no DHCP router/server is
present or DHCP is disabled, the PIXELATOR MINI will fall
back to the static IP address.
IP Address / NetMask / Gateway:
These are used if DHCP
is disabled or unavailable. These options set the Static IP
address. These settings should be set to be compatible
with other devices on the network.
DMX Protocol Input:
Choose between Art-Net, sACN and
ESP as the Protocol. For Art-Net, set the Net, Subnet.
LED Protocol Output:
Select the SPI protocol which
matches the Pixels that the PIXELATOR MINI will control.
Universe/Output:
Select how many Universes each output should control (0-2 : 0 will display the output).
First Universe:
Set the Ethernet-DMX protocols Universe.
Second Universe:
Set the Ethernet-DMX protocols Universe.
Pixel Order:
The rate at which Storm 8 will output the Data from its DMX port (40 Frames per second is
default). It will repeat the last received frame to comply with DMX standard.
Merge Type:
When enabled, this can allow the merging for two Ethernet-DMX sources from different IP
address whilst sending on the same Universe in either a LTP (Latest Takes Precedence) or HTP (Highest
Takes Precedence) merge. More information can be found in the Functional Features section of this
document.
Save:
All changes must be saved to take effect the STORM 8 takes up-to 10 seconds to save.
Factory Default:
STORM 8 will be reset to Factory condition, including the DHCP being enabled, with the
original fall-back static IP and with all setting reset (see the Out of the Box section).
Reboot/Restart:
Please allow up-to 10 seconds for the device to reboot. When the web interface page
refreshes the STORM 8 is ready.
Node Name
Firmware Version
Serial Number
DHCP Status
IP Address
NetMask
Mac Address
Link Speed
Input
Output
