DMX USB PRO MK2 (70314)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
8
|
ID: 134658
Document Updated: Dec 2021
Output Port:
The DMX Port to output the show (Port 1, 2 or both).
Input:
Choose between a DMX input using the DMX Male connector on the breakout cable, Art-Net through the
connected computers internal loopback IP address (127.0.0.1) or Artnet through network.
□
Art-Net Universe:
If Art-Net is set as the Input. Then an Art-Net Universe will need to be specified.
Recording Control:
By enabling Recording Control, and selecting the Trigger Channel and respective value, it will
only record whilst the trigger is active. Once the selected trigger channel and value is not sent anymore, the
recording will stop automatically. It will still need to be manually stopped to proceed to next step of recording.
Recording begins, only when the first frame is captured.
Recorded frames as counted, are shown and an estimate
of the memory usage is also shown via the progress bar.
The recording will stop automatically if all memory has
been used.
There is no preview available during recording.
Once the recording process has finished, click on “Stop”.
Once the recording has been stopped, click on “Upload
to DMX USB PRO Mk2” button. This will then load the
show file onto memory of DMX USB PRO Mk2 and the
progress is shown on the page. It is important, not to
interrupt the memory load process, as it might corrupt
the show. Please wait till the upload progress finalises.
Once complete, the page will reload, and display
message of show stored on device. Head over to
PLAYBACK tab to play the standalone show.
DMX receive
User may inspect DMX data received by DMX USB PRO
MK2 via INPUT tab in EMU.
By selecting DMX USB PRO MK2 as the input device on
the left side dropdown list. Individual channel will light
up (light blue), indicating DMX data received.
By manually highlighting the channel, the DMX value
received will be displayed in the plot beneath the matrix.
MIDI (legacy feature)
The DMX USB PRO Mk2 has the capacity to support the legacy ‘DMX + MIDI accessory cable (PN: 79147)’.
discontinued
Q1 2021
.
This is a non-class compliant MIDI implementation included as part of the DMX USB PRO Mk2’s MIDI API.
Legacy software (PRO-Manager) provides the ability to send test MIDI notes and display received MIDI data.
MIDI Connector pinouts
5pin MIDI OUT
Pin 1: NC
Pin 2: 0V
Pin 3: NC
Pin 4: Data +
Pin 5: Data -
5pin MIDI IN
Pin 1: NC
Pin 2: NC
Pin 3: NC
Pin 4: Data +
Pin 5: Data -
