Entryvue VD-950, Instruction Manual

Page: 5 / 7

MONITOR 17 MONITOR 25
MONITOR 29
MONITOR 30
MONITOR 28
MONITOR 27
MONITOR 31
MONITOR 32
MONITOR 26
MONITOR 23
MONITOR 24
MONITOR 22
MONITOR 21
MONITOR 20
MONITOR 19
MONITOR 18
Page 04
If you have Door Station B, the monitors connected to the
second button must be set with the following Dip Switches:
Door Station E and F - Settings
Instructions:
* Use " * " to cancel, and "#" to confirm.
* You should press "#” to confirm after inputting the code numb er
each time, otherwise, the set up will be cancelled automatically in 10
seconds.
*. Input the master code to switch the setting mode, and input the
corresponding setting code to perform the function. After setting has
been saved, input the next setting code to continue the set up. Press
" * " at any time to exit the setting mode.
* Each setting is indicated by the lighting of the LED indicators on the
right side of the unit, and by the sound of the buzzer.
* When the registered code has been input on the keypad, the LED
indicator (Group 1: red, group 2: blue) lights up, the buzzer s ounds,
and the door strike/magnetic lock is unlocked.
*User Group 1 codes are linked to the first lock, and User Group 2
codes are linked to the second lock.
* If you make a mistake when inputting the user code, press “#” to
cancel and input the user code again.
* If 10 continuous incorrect access codes are attempted, the release
function will be disabled for 60 seconds, the LED lights will stay on for
60 seconds, and the door station will beep 8 times.
SETTINGS SETTING RANGE DEFAULT
SETTING
CODE
1 Reset all settings 1,2,3,4 - 00
2 Setting the master code
1 – 12 digits
Valid keys: 0 - 9
1, 2, 3, 4 01
3 Setting the lighting time 10 to 99 seconds
10
seconds
02
4 Setting the unlock time 1 – 99 seconds 1 second 03
5 Setting the unlock mode
0: Open
1: Closed
Open 04
6 Keypad tone settings
0: On
1: Off
On 05
7 Reset code settings 1, 2, 3, 4 - 06
8 *and # settings
0: Normal
1: Reverse
Normal 07
9 Call tone settings
0: Enable
1: Disable
Enable 08
10
Interference resistant grade
settings
Valid Keys: 0 - 5 2 09
12
Setting the code for
Temporary 1
1 – 12 digits
Valid Keys: 0 - 9
- 18
13
Setting the code for
Temporary 2
1 – 12 digits
Valid Keys: 0 - 9
- 19
14
Setting the code for
User Group 1
1 – 12 digits
Number of codes: 40
Valid Keys: 0 - 9
- 20 – 59
15
Setting the code for
User Group 2
1 – 12 digits
Number of codes: 40
Valid Keys: 0 - 9
- 60 - 99