Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL – WIRING GUIDE
JP1
Buzzer Jumper, JP2
Cold Start Initial Button, COLD
Reset Button, RESET
Steps of performing Factory Default:
1. Please ensure that the jumper is inserted on JP1 7-8
2. Press and Hold COLD switch
3. Press RESET Switch and Release RESET switch
4. Release COLD switches when a long beeping sound heard
Performing Factory Default
Factory Default will change the IP Address back to 192.168.1.100, Server IP to
192.168.1.254 and Port to 2020
For the network controller support AES Encryption feature, factory default will
disable the AES feature
The buzzer will only beep if jumper is placed on JP2 1-2
Make Sure the Jumper
Cap is placed on JP1 (1-2)
after factory default
