3.1.7
Fix the tension wheel assembly
a Fix the tension wheel assembly (10) to the beam (16) with the nuts (23) and screws (24), do
not tighten the nuts (23) fully, so it shall be able to slide along the beam (16).
b The position of the tension wheel assembly (10) should be as close as possible to the drive unit,
but make sure that the tension wheel assembly (10) will not interfere with the door carrier
when the door is fully opened.
23
10
16
24
Nut
M6 (2x)
Screw
M6x16 (2x)
Tension wheel assembly
10
Beam
16
Nut: M6
23
Screw: M6x16
24
13
Issue 2019-11-12
1019617-DIen-2.0
3 Mechanical installation