Toggle Power Key Punch-through Functionality
By default, if the remote control is in STB mode, the remote control "Power" button switches STB off� ONLY. To control the
remote control "Power" button functionality to switch off� the TV and STB, please do the following:
1.
Press and hold the "STB" mode key for 5 seconds. The "STB" mode key backlight will light up;
2.
Press "POWER" key once;
3.
Do either of the following:
a. Press "1" to control both the STB and TV.
OR
b. Press "0" to control the STB ONLY.
NOTE:
While in the programming mode, if no key is pressed within 30 seconds, the device mode key backlight will
blink rapidly for 7 times and then stop - indicating an error.
Toggle Volume Key Punch-through Functionality
By default, "Vol +/-" and "MUTE" keys are sent to STB only when the remote control is in STB mode. Punch-through func-
tion for those keys is enabled at
the same time when programming the device code for TV or AUX. That is:
1.
If you program the device code for a TV device, the punch through function will be confi�gured for TV and disabled
for AUX at the same time;
2.
If you program the device code for an AUX device, the punch through function will be confi�gured for AUX and disa-
bled for TV at the same time.
To disable the Punch-through function for those keys, do the following:
1.
Press and hold "STB" for 5 seconds, then "STB" mode key backlight will light up;
2.
Press "STB" key once again, then both "STB" and "AUX" mode key backlights will light up;
3.
Press "0".
In case of any remaining doubts you could check the full guide
