Quick
St
ar
t Guide
Quick
St
ar
t Guide
ka
m
ai
m
edia
r
eceiver
ka
m
ai
m
edia
r
eceiver
17
16
the signals from the aNt iN port is loop-through to tv Out
port. if your kamai does not have tuner option and you se-
lected moca for networking, you can use a coaxial cable (not
provided) and connect the cable to the aNteNNa iN port on
your tv. Your tv will receive the video signals from the coaxial
outlet.
cable not included
S-videO
aNt iN
SteP 5: POWeriNG uP
Setting up remote control
1. Open the battery cover by pressing down on the battery
cover latch and sliding it off.
2. insert the batteries, matching the “+” and “-” marks on the
batteries with the interior of the remote control.
3. Snap on the battery cover to close.
NOTE
: refer to the remote control Guide for more details
about other remote control features.
using ir extender receiver
the remote control uses infrared (ir) light signals to control
the kamai. ir signals cannot go through walls or other solid
objects. if the line of sight of your kamai is blocked, then you
can use the ir extender receiver provided to extend the reach
of ir signals from the remote control.
