7
STEP 3. Installation
① Attach an M10x75 Hex Head
Bolt (13), and M10 Hex Nut (19),
to each of the eight C-Clamps (7),
as shown.
② Position C-Clamp (7), close to
the base of the support arm so
that the tongue on the upper jaw
engages the groove in the Leg
Rail Mount (3), or (4). Place a
Clamp Bolt Foot (8) on the end of
the M10x75 Hex Head Bolt (13),
as shown.
③ Tighten the M10x75 Hex
Head Bolt (13), and the M10 Hex
Nut (19), until entire assembly is
firmly affixed to the truck bed
rail. Install a second C-Clamp to
the same Leg Rail Mount at least
4” from the first.
④ Continue the above procedure until you have installed two C-Clamps to each of the four Leg Rail
Mounts, securely affixing both crossbar assemblies to the truck bed rails as shown. WARNING! ALL
EIGHT C-CLAMPS MUST BE PROPERLY INSTALLED AS SHOWN FOR SAFE OPERATION OF THIS RACK.
Position clamps at
least 4” apart