Installing a VHSIM
2-12
Installation
7.
Place the VHSIM2-A6DP behind the device faceplate as shown back in
Figure 2-6
.
8.
Insert the connectors of the VHSIM2-A6DP into the host device connector pins on the device.
9.
Press down firmly on the back of the VHSIM2-A6DP until the pins slide all the way into the
connector holes.
10. Secure the VHSIM2-A6DP to the faceplate using the screws saved in
step 5
.
11. Secure the VHSIM2-A6DP to the standoffs using the screws saved in
step 6
.
12. Reattach the chassis cover to the device, reconnect the power cord, and reconnect the device to
your network.
13. Refer to
Chapter 3
for instructions on configuring the VHSIM2-A6DP using Local
Management.
CAUTION: In
step 8
, ensure that the standoffs on the device align with the standoff
screw holes on the VHSIM2-A6DP to prevent bending the pins.
ELECTRICAL HAZARD: Ensure that the chassis cover is in place before reconnecting
the power cord.