Enterasys SecureStack C2, Configuration Manual, Page: 544 / 607

show macauthentication
18-20 Security Configuration
show macauthentication
Use this command to display MAC authentication information for one or more ports.
Syntax
show macauthentication [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, MAC authentication information will be displayed for all ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display MAC authentication information for
ge
.2.1 through 8:
C2(su)->show macauthentication ge.2.1-8
MAC authentication: - enabled
MAC user password: - NOPASSWORD
Port username significant bits - 48
Port Port Reauth Auth Auth Reauthentications
State Period Allowed Allocated
------- -------- ---------- -------- --------- -----------------
ge.2.1 disabled 3600 1 1 disabled
ge.2.2 disabled 3600 1 1 disabled
ge.2.3 disabled 3600 1 1 disabled
ge.2.4 disabled 3600 1 1 disabled
ge.2.5 disabled 3600 1 1 disabled
ge.2.6 disabled 3600 1 1 disabled
ge.2.7 disabled 3600 1 1 disabled
ge.2.8 disabled 3600 1 1 disabled
Table 18 ‐ 3 provides an explanation of the command output.
clear macauthentication significant-bits 18-29
For information about... Refer to page...
port ‐ string (Optional) Displays MAC authentication information for specific port(s).
For a detailed description of possible port ‐ string values, refer to “ Port String
Syntax Used in the CLI ” on page 5 ‐ 2.
Table 18-3 show macauthentication Output Details
Output What It Displays...
MAC authentication Whether MAC authentication is globally enabled or disabled. Set using the set
macauthentication command as described in “ set macauthentication ” on
page 18-22.
MAC user password User password associated with MAC authentication on the device. Set using the set
macauthentication password command as described in “ set macauthentication
password ” on page 18-22.