set snmp targetaddr
6-26
SNMP Configuration
provides
an
explanation
of
the
command
output.
set snmp targetaddr
Use
this
command
to
configure
an
SNMP
target
address.
The
target
address
is
a
unique
identifier
and
a
specific
IP
address
that
will
receive
SNMP
notification
messages
and
determine
which
community
strings
will
be
accepted.
This
address
configuration
can
be
linked
to
optional
SNMP
transmit
parameters
(such
as
timeout,
retry
count,
and
UDP
port).
Syntax
set snmp targetaddr targetaddr ipaddr param param
[
udpport udpport
]
[
mask mask
]
[
timeout timeout
]
[
retries retries
] [
taglist taglist
] [
volatile
|
nonvolatile
]
Parameters
Table 6-9
show snmp targetaddr Output Details
Output
What It Displays...
Target Address Name
Unique identifier in the snmpTargetAddressTable
.
Tag List
Tags a location to the target address as a place to send notifications.
IP Address
Target IP address.
UDP Port#
Number of the UDP port of the target host to use.
Target Mask
Target IP address mask.
Timeout
Timeout setting for the target address.
Retry count
Retry setting for the target address.
Parameters
Entry in the snmpTargetParamsTable.
Storage type
Whether entry is stored in
volatile
,
nonvolatile
or
read-only
memory.
Row status
Status of this entry:
active
,
notInService,
or
notReady
.
targetaddr
Specifies
a
unique
identifier
to
index
the
snmpTargetAddrTable.
Maximum
length
is
32
bytes.
ipaddr
Specifies
the
IP
address
of
the
target.
param
param
Specifies
an
entry
in
the
SNMP
target
parameters
table,
which
is
used
when
generating
a
message
to
the
target.
Maximum
length
is
32
bytes.
udpport
udpport
(Optional)
Specifies
which
UDP
port
of
the
target
host
to
use.
mask
mask
(Optional)
Specifies
the
IP
mask
of
the
target.
timeout
timeout
(Optional)
Specifies
the
maximum
round
trip
time
allowed
to
communicate
to
this
target
address.
This
value
is
in
.01
seconds
and
the
default
is
1500
(15
seconds.)
retries
retries
(Optional)
Specifies
the
number
of
message
retries
allowed
if
a
response
is
not
received.
Default
is
3.
taglist
taglist
(Optional)
Specifies
a
list
of
SNMP
notify
tag
values.
This
tags
a
location
to
the
target
address
as
a
place
to
send
notifications.
List
must
be
enclosed
in
quotes
and
tag
values
must
be
separated
by
a
space
(for
example,
“tag
1
tag
2”
).
volatile
|
nonvolatile
(Optional)
Specifies
temporary
(default),
or
permanent
storage
for
SNMP
entries.
Summary of Contents for SecureStack C2
