Fitting a Power Supply Adapter
Enterasys Wireless Outdoor AP Installation Guide
3-7
Figure 3-3
Position of the Opening in the Housing for the Power Supply with the Housing
Cover Removed
When
connecting
the
cores,
you
should
therefore
make
sure
that
the
connector
is
oriented
as
depicted
in
.
Figure 3-4
Position of the Connector When Inserted in the Socket of the Housing
2.
Press
the
connector
into
the
socket
in
the
housing
until
it
engages.
3.
Secure
the
power
cable
with
a
strain
relief
clamp.
Fitting a Power Supply Adapter
The
Enterasys
Wireless
Outdoor
AP
supports
only
the
110
‐
230
V
AC
power
supply
adapter.
To fit and connect a power supply adapter:
1.
Fit
the
power
supply
adapter
in
the
Enterasys
Wireless
Outdoor
AP,
as
depicted
in
The
connector
on
the
rear
of
the
power
supply
adapter
must
engage
fully
in
the
socket
of
the
housing.
The
entire
rear
surface
of
the
power
supply
adapter
must
make
contact
with
the
inner
surface
of
the
Enterasys
Wireless
Outdoor
AP.
Warning:
Power supply cables may only be connected when the power is turned off. Start up the
Enterasys Wireless Outdoor AP only after screwing the housing cover in place again so that
protection from touching live parts is restored.
Summary of Contents for AP2650
