Enterasys 7100G Series, Hardware Installation Manual

Page: 79 / 90

2-Post Rack Mount Installation
Enterasys 7100G-Series Hardware Installation Guide C-13
Figure C-11 Securing Mid-Mount Rail Assembly
Securing the 7100G-Series Chassis to the Rack
To secure the 7100G-Series chassis to the rack:
1. Slide the chassis onto the rail assembly until the chassis adapter plate ears meet the rail
assembly ears. See
Figure C-12 on page C-14.
2. For a flush mount rail assembly configuration, secure each side of the chassis using a screw or
fastener appropriate to your rack that you provide.
3. For a mid-mount rail assembly configuration, secure each side of the chassis using a black,
10-32 screw that comes with the rack mount kit. These screws are screwed into the cage nut
installed in the square rail ear opening as described in Step
3 of section “ Mid-Bracket to Rail
7.25 Inch Flush Mount or Mid-Mount Assembly ” on page C-10.
1 Rack appropriate screws or fasteners (4) 2 Cage nuts (2)