Enterasys 7100G Series, Hardware Installation Manual

Page: 78 / 90

2-Post Rack Mount Installation
C-12 Optional Rack Mount Rail Kit Installation
Figure C-10 Securing a Flush Mount Rail Assembly
Securing the Rail Assembly for a 2-Post Mid-Mount Configuration
When securing the rail and mid-bracket assembly in a mid-mount configuration:
1. Ensure that a cage nut is installed in the rail ear square opening as described in “ Mid-Bracket
to Rail 7.25 Inch Flush Mount or Mid-Mount Assembly ” on page C-10
2. Align the mid-bracket ear openings with the outer front flange rack post openings as shown in
Figure C-11 on page C-13
3. Secure the rail assembly with two screws or fasteners appropriate to the rack at both the rail
ear and mid-bracket ear
1 Rack appropriate screws of fasteners (8)