Enterasys 7100G Series, Hardware Installation Manual

Page: 77 / 90

2-Post Rack Mount Installation
Enterasys 7100G-Series Hardware Installation Guide C-11
Figure C-9 Securing Mid-Bracket to Rail 7.25 Inch Flush Mount or Mid-Mount
Securing the Rail Assembly for a 2-Post Flush Mount Configuration
When securing the rail and mid-bracket assembly in a flush mount configuration:
1. Align the rail ear circular openings with outer front flange rack post openings and the
mid-bracket ear openings with outer rear flange rack post openings as shown in
Figure C-10
on page C-12
2. Secure each rail assembly with two screws or fasteners appropriate to the rack at both the rail
ear and mid-bracket ear
1 Four screws from extension rack assembly 3 Rail ear square opening
2 Mid-bracket 4 Cage nut (mid-mount configuration only)