Appendix B:
LM Security Screens
B-4
PN 9033215
Field Definitions
Refer to
Table B-1
for a functional description of each screen field.
Table B-1
Screen Field Descriptions
Use this field…
To…
Download
Method
(Selectable)
Select a method (RUNTIME, DOWNLOAD
CONFIG, or UPLOAD CONFIG) to download
(receive) an image file from a TFTP server, or
upload (transmit) or download a configuration file
to/from a TFTP server. The uploading and
downloading of a configuration file is
accomplished according to the IP address and the
file name entered in the Download Server IP and
Download File Name fields, respectively.
RUNTIME
– Used to download a new image
from a TFTP server. This allows the replacement
of the image file currently stored in the
SmartSwitch device.
Section B.1.1
describes how
to download using Runtime.
DOWNLOAD CONFIG
– Used to download a
configuration file from a TFTP server to a
SmartSwitch device. The configuration file must
be one that was uploaded to the TFTP server from
a SmartSwitch device of the same model with the
same optional hardware, and running firmware
revision 4.10 or higher.
The SmartSwitch device automatically reboots
after a successful download.
Section B.1.2
describes how to download a configuration file.
UPLOAD CONFIG
– Used to upload a
configuration file from a SmartSwitch device to a
TFTP server. The configuration file must be one
that was downloaded to a SmartSwitch device of
the same model with the same optional hardware,
and running firmware revision 4.10 or higher.
Section B.1.3
describes how to download using
TFTP.
