ENSONIQ Corporation
SPM-1 Musician’s Manual
Page 20
RACK MOUNTING THE SPM-1
The SPM-1 can be rack mounted in a standard 19” audio rack by installing the rack mount hardware included with
the unit. The procedure is as follows:
1.
Fasten the rack mount “ears” to the sides of the front panel with the supplied screws, making sure that the oval
mounting holes face the front of the unit.
2.
The SPM-1 occupies two standard rack spaces (3½”). We recommend the use of nylon washers when rack
mounting any unit.
3.
If you are installing another piece of equipment directly below the SPM-1 in your rack, it may be necessary to
remove the rubber feet from the underside of the cabinet.
SPECIFICATIONS
SOUNDS
Bank A — Piano 1 (grand piano), Piano 2 (detuned piano), Piano 3 (bright piano), E. Piano 1 (electric piano), E.
Piano 2 (chorused electric piano).
Bank B – Marimba 1 (hard mallet), Marimba 2 (soft attack), Vibes, Clav 1 (straight clav), Clav 2 (chorused Clav).
Bass – Upright (acoustic), Electric.
AUDIO OUTPUTS
Right Channel, Left/Mono, Headphone, Bass.
MIDI
MIDI in, Out, and Thru jacks
Mode 3 (Omni Off/Poly)
16 MIDI Channels programmable from front panel
Separate MIDI Channel for bass
MIDI Program changes in and out
Sustain and Sostenuto pedal sent and received
DIMENSIONS
17.2” (43.7 cm) wide x 3.5” (8.9 cm) high x 12” (30.5 cm) deep
Weight: 12.4 pounds (5.7 kg)
STANDARD ACCESSORIES
Musician’s Manual, power cord, rack mount ears
OPTIONS
Model SW-5 Sustain and Sostenuto Pedal
Summary of Contents for SPM-1
Page 4: ......
