manualshive.com logo in svg

Ensemble Designs BrightEye 81-F, User Manual

Share
Download
Ensemble Designs BrightEye 81-F User Manual Download Page 10

www.ensembledesigns.com

BrightEye 81-F - Page 10

 81-F

3G/HD/SD Optical SDI to HDMI Converter

Inputs and Outputs

•  HDMI Out – Outputs HDMI 1.3. The HDMI output of BrightEye 81-F is not HDCP encrypted.  

The High Definition Multimedia Interface (HDMI) is an uncompressed, all-digital interface that 

transmits digital video and eight channels of digital audio. HDMI is a bit-serial interface that 

carries the video content in digital component form over multiple twisted-pairs. The HDMI 

interface standard supports limited cable length as compared to SD and HD SDI. The use of 

cables over 10m (30 feet) is not recommended. 

•  SDI Output – BrightEye 81-F provides one SDI Output BNC. It outputs an electrical version of 

the SDI optical input. The output standard (3G, HD or SD) follows the input standard.

•  Optical Input – This fiber optic input accepts a 3 Gb/s HD SDI, 1.5 Gb/s HD SDI, or a SD SDI 

video signal on the LC/UPC connector. 

Summary of Contents for BrightEye 81-F




























Reviews:

No comments

Brands by name

Popular brands

Load more brands