BrightEye-7
BrightEye PC Control
The BrightEye PC application is included on CD-ROM with every BrightEye unit.
Installation and instructions for using BrightEye PC are given in the data pack
that accompanies the application.
If the unit is connected to a computer running the BrightEye PC application, the
following menus are available for controlling and monitoring the
BrightEye 24 unit.
Config Menu
•
Input Pres
– indicates the presence of an SDI input. Shows:
None
,
525
Lock
, or
625 Lock
.
•
Setup
– enable or disable setup on output by selecting
On
or
Off
. Only
available on 525 NTSC output.
•
DeMux Status
– indicates the status of the AES group selected for disem-
bedding. Shows group number and if there is valid audio in that group.
•
Group Sel
– selects the AES group for disembedding. This pulldown lets
you chose between:
Group 1
,
Group 2
,
Group 3
, or
Group 4
.
•
Peak Indicator
– selects the amount of headroom to use in determining
peak levels. This pulldown lets you chose between:
Clipping
,
2 dB
Headroom
,
4 dB Headroom
,
6 dB Headroom
,
8 dB Headroom
, or
10
dB Headroom
.
•
Dig Ref Level
– selects the expected reference level for the embedded
audio. This pulldown lets you choose between:
-20 dBFS
or
-18 dBFS
.
•
Anlg Out Level
– selects analog output reference level. This pulldown lets
you chose between:
-10 dBu
or
+4 dBu
.
TM
BrightEye 24
