Ensemble Designs Avenue 7925, Manual, Page: 17 / 34

www.ensembledesigns.com 7925-17
Use the
Timing B
menu shown below to adjust the following parameters:
Fine Phase • – Adjust for proper ScH phase with respect to other sources. If fine phase
will not adjust properly, readjust the horizontal phase by up to ±2 clocks until the fine
phase falls into place.
Hor Timing • – Adjust the horizontal timing of the output signal to place the leading
edge of sync coincident with other sources.
Vertical Timing • – Set the vertical timing to a typical setting of 0 lines.
Delay •
– The amount of total delay through the module is reported in lines.
Model 7925 Dual HD Downconverter