Use the
Timing
menu shown below to adjust the following parameters:
•
Frame Sync
– turn the Frame Sync function on or off.
•
Timing
– when Frame Sync is on, adjust the horizontal timing of the output
signal to place the leading edge of sync coincident with other sources.
•
Frame Delay
– for asynchronous inputs, set the amount of frame delay desired..
This menu provides a
Delay
window at the bottom of the screen that will report the total
delay in lines of the module.
Use the
Vid Out
menu shown below to adjust the following parameters:
•
Bypass
– set to
Normal
or
Bypass
to completely bypass any digital processing.
•
Vert Blanking
– set the vertical blanking for
Wide
or
Narrow
.
•
Test Pattern
– select a test pattern to be sent to the video output of the module.
•
Signal Mute
– set to either mute the output to black when noise is present, to
freeze to the last frame, or select no muting.
•
Strip Audio
– select the box to strip embedded audio from the output. Leave the
box unselected to pass embedded audio through to the output.
Model 7500 HD Video Frame Sync
7500-24