EM265B
PRIOR TO INSTALLING THIS PRODUCT:
To avoid potential shorts in the electrical system, be sure to disconnect
the (-) battery cable before installation. Use this unit with a 12-volt battery
and negative grounding only.
Failure to do so may result in a fire or malfunction.
When replacing the fuse, be sure to only use a fuse of the rating specified
on this product.
To avoid short-circuiting, cover any disconnected leads with insulating
tape. It is especially important to insulate any unused wires, which if left
uncovered may cause a short circuit. When connecting other devices to
this product, refer to the manual for the product to be connected. The
black cable is ground, make sure to connect the ground wire first.
Ensure that the ground cable is properly connected to metal parts of the
vehicles body frame or direct to the battery if your vehicle does not have a
grounded chassis frame. The ground cable of this unit’s power amp and a
second powered system must be connected to the frame separately with
different screws. If the screw for the ground wire loosens or falls out, it
could result in fire or malfunction.
SUGGESTED MOUNTING POSITIONS:
The EM265C
can be mounted in three different configurations:
Always double check for mounting depth limitations,
Never cut before you check,
GROUND CABLE
METAL FRAME
YOUR AMPLIFIER
SPEAKER 1
SPEAKER 2
+
-
+
-
+12V BATTERY YELLOW
REMOTE OUT
+12V BLUE
CHASSIS
GROUND
POINT
BATTERY
OPTIONAL DIRECT BATTERY WIRING CIRCUIT
BLACK
OPTIONAL
FUSE AND FUSE HOLDER
(NOT INCLUDED)
CHASSIS
GROUND
POINT
Normally Open
ON/OFF ACC switch
YOUR
BATTERY
KILL SWITCH
YOUR RADIO
STRIPPED WIRE NEGATIVE
12FT
