background image

4. How To Use: 
4.1 Charging the device ( As Fig. 1) 

Note: 

If the power indicator is blinking during or after an irrigation, that 

means the battery need to be recharged. A full charge will take 

about 4 hours.

4.2 Use the Water Flosser 

• Attach the nozzle onto the unit. (Fig. 2) 

• Please cover the lid of the tank tightly before using the water 

flosser to avoid water leakage. 

• Take the charger base cover down and insert the device socket 

(make sure no liquid is remaining inside the device plug) .

• Insert the charging adaptor securely into the power outlet.
• During charging, the blue logo indicator blinks slowly, and when 

fully charged, the blue logo indicator will stay on.

• Put the cover on the charger base again after charging is nished.

• Open the cap of the water tank to fill the tank with water which 

should not exceed 40℃ , then close the cap.(Fig. 3)

• Or, slide the water tank down off the unit, fill the tank with water 

which should not exceed 40℃ , then attach the tank on the unit. 

(Fig. 4) 

• Press the "

" button to change the working mode after the 

flosser turns on, the default mode keeps the same as last shut 

off in that situation. (Fig. 5)

Switch

Model Switching button
Strengthen

Soft

Custom

Standard

Pulse

LED indicator

3

4

Summary of Contents for W1P






Reviews: