Page 9
PEDESTAL INSTALLATION GUIDE
•
Four (4) Anchor Bolts with Nuts and Washers
•
REQUIRED EQUIPMENT FOR A SINGLE-MOUNT PEDESTAL WITH ONE CLIPPERCREEK HCS CHARGING STATION
(ONE EVSE PER PEDESTAL):
•
One (1) ClipperCreek HCS EVSE Pedestal Kit, ClipperCreek part number 0300-00-019.
•
One (1) ClipperCreek HCS Charging Station (EVSE), part number depends on amperage selected.
•
One (1) dedicated 208 or 240 VAC branch circuit.
•
One (1) circuit breaker appropriately sized for the EVSE charging capacity.
•
Two (2) Live Line conductors with enough length to comfortably pull all the way through and above the top of the pedestal.
•
One (1) Ground Line conductor with enough length to comfortably pull all the way through and above the top of the pedestal.
•
Conduit sized to fit all three conductors.
•
Four (4) Anchor Bolts with Nuts and Washers
REQUIRED EQUIPMENT FOR A DUAL-MOUNT PEDESTAL WITH TWO CLIPPERCREEK HCS CHARGING STATIONS
(TWO EVSE’S PER PEDESTAL):
•
One (1) ClipperCreek HCS EVSE Pedestal Kit, ClipperCreek part number 0300-00-019.
•
One (1) ClipperCreek Dual-Mount HCS Pedestal Kit, ClipperCreek part number 0300-00-020.
•
Two (2) ClipperCreek HCS Charging Stations (EVSEs), part number depends on amperage selected.
•
Two (2) dedicated 208 or 240 VAC branch circuits.
•
Two (2) circuit breakers, appropriately sized with respect to the charging capacity of each EVSE.
•
Two pairs (2x2) Live Line conductors (one pair for each EVSE) with enough length to comfortably pull all the way through and
above the top of the pedestal.
•
Two (2) Ground Line conductors (One for each EVSE) or a single bonded Ground Line with enough length to comfortably pull all
the way through and above the top of the pedestal.
•
Conduit sized to fit all Live Line and Ground Line conductors.
•
Four (4) Anchor Bolts with Nuts and Washers