19
Chapter 2 INSTALLATION
e.
ATX Power Switch Lead
( JP4, Pin 10, 12)
The system power is controlled by a push-switch, connected
to this lead. Pushing the button once will turn on the power
and pushing again will turn off the power. The system power
LED shows that status of the system’s power. This
connection does not have a function when a standard power
supply is used.
NOTE:
If the power to the ATX power supply is
interrupted while the motherboard is on,
standby power will remember that the
motherboard should be on and boot the
computer when power is reapplied to the
ATX power supply.
EP-PI11 User’s Manual
2
1
JP4, Pin 10, 12:
ATX Power Switch On /
Off Lead
(A3 Location)
