USER MANUAL
© 2010 EnOcean | www.enocean.com
EPM 300(C) OEM User Manual | Page 6/11
EPM 300(C)
4. Getting started
1. Open battery cover (backside) and insert two lithium or alkaline type
AA/LR06 batteries.
2. Activate EPM 300(C) by pressing the on/off button. Battery low will be
indicated by flashing mode LED.
3. Send EnOcean telegram by pushing a self-powered switch (e.g. PTM 200)
or by pressing the learn button of a self-powered sensor.
4. Signal strength (RSSI value) will be shown by a reverse traffic light.
EPM 300 signal strength:
5. Valid LED shows if a valid telegram PTM switch or sensor teach-in
telegram has been received:
Valid EnOcean PTM or teach-in telegram received
internal
antenna
external
antenna
