2. APPLICATION INFORMATION
Mechanical characteristics:
Important notes:
•
It is recommended to mount a PCB on top of ECO 100 in order to avoid forces at the
energy output pins and to reduce dust inside the energy converter.
•
If no PCB is mounted thin wires should be used for the connection between ECO 100
and the radio transmitter.
•
For mounting the PCB please use screws of type EJOT KB 22x5.
•
The soldering pins are designed for 0.8mm thick PCBs.
•
The spring needs play of 0.4mm within operating lever as shown in Figure 4
©EnOcean GmbH, Dr. W. Heller
Page 6 of 10
ECO 100 User Manual V1.01
