ennoLogic eV164P, User Manual

Page: 10 / 16

7
1.4 How to Use Your Cross Line Laser Level
Level / Point Transfer
• Establish a horizontal reference plane by using the
horizontal laser beam.
• Position the desired object(s) until they are aligned with
the horizontal reference plane to make sure that the object(s)
are level.
Plumb / Point Transfer
• Establish a vertical reference plane by using the vertical
beam.
• Position the desired object(s) until they are aligned with
the vertical reference plane to make sure that the object(s)
are plumb.
• Establish 2 reference points which need to be plumb.
• Align either the up or the down plumb beam to a set
reference point.