ennoLogic eM860T True RMS Quick Start Manual Download Page 3

Page: 3 / 4

ENNOLOGIC TRUE RMS MULTIMETER EM860T-QUICK-START GUIDE

Accessing Secondary

Functions

Press the

Select

key to switch to the

secondary functions (indicated by

blue symbols).
For example, to setup the meter for

measuring capacitance, turn the

rotary switch to the position,

then press the blue

Select

key. Or,

to measure AC currents in the mA

range, set the rotary switch to the

position, then press the

Select

key.

GETTING FAMILIAR WITH THE TRUE RMS MULTIMETER

Data Hold and Backlight

To freeze the current reading (Data Hold), press the

Hold/Backlight

key briefly. Press it again to turn Data Hold off.
To turn the backlight on and off, press and hold this key for 2 seconds.

Summary of Contents for eM860T True RMS

Page 1: ...ectors from the terminals Remove the red protective rubber casing by carefully peeling it away from the black plastic enclosure Then use a screwdriver to unscrew the two screws on the battery cover on...

Page 2: ...pacitance Continuity Check Diode Test Hz Frequency Duty Cycle C F Temperature A mA and A or AC or DC Current GETTING FAMILIAR WITH THE TRUE RMS MULTIMETER Connection terminal for the red test lead dur...

Page 3: ...n the rotary switch to the position then press the blue Select key Or to measure AC currents in the mA range set the rotary switch to the mA position then press the Select key GETTING FAMILIAR WITH TH...

Page 4: ...he SELECT key while turning the meter on What is the NCV function and how do I use it NCV stands for Non Contact Voltage detect It allows you to detect AC voltages in a cable or circuit without making...