10. Doorbell Set up
Click “Doorbell set up”,then click the “Doorbell1”:
Doorbell ID
：
Each doorbell had an individual ID,can copy this ID to send to another users.
Doorbell nickname
：
The default nickname is “Doorbell1 to 4”,can click it to edit the nickname.
Select the current call doorbell:
Select the doorbell want to call
Video call default state:
choose “Visual talkback” or “Remote monitoring”
Call time:
can edit the calling time,max to 10 minutes
Password checking:
If turn on,then need to input the password when using the APP to
open the door (Default password 888888)
Unlock delay
：
can set the unlock delay time
Video recording time
：
Can set the video recording time
Video resolution
：
480P/720P option
PIR sensitivity
：
Low/Mid/High option
Phone offline dial phone number
：
Run App,When APP is offline,then the doorbell can call
the host phone number (Note: Only insert a SIM card to doorbell,then can do this setting)
Doorbell call phone number
：
Input the host phone number,can edit it anytime
(Note:Only insert a SIM card to doorbell,then can do this setting)
Client state
：
Number of adding client in the doorbell
Wifi signal
：
Check the doorbell wifi signal (Note: Only the wifi signal reach “good”,then
wifi can be used.If use network wire to connect the doorbell,then can’t be checked wifi signal)
Modify password
：
Default password 888888,when modify the password,another
users can’t connect the doorbell.
。
Delete doorbell
：
Can’t receive the doorbell message when delete the doorbell
Restore factory setting
：
Within 5 minutes after turn on the doorbell,press the calling
button about 5 seconds,hints a music,then it is just restoring the factory setting,
it will last about 1-2 minutes.
Summary of Contents for SY-WIFI005
Page 5: ...4 E lock Wire Diagram ...
