Electrical Components/Requirements
Please Read Carefully!
Each sauna will require a dedicated circuit when plugged into an outlet according to the chart below.
A “dedicated circuit” requires that no other appliance should share the outlet/circuit with the sauna.
Failure to comply with this requirement may cause an electrical interruption and/or a diminished
performance. To avoid any potential electrical hazards, it is recommended that only a qualified
electrician installs your dedicated electrical wiring for a proper sauna functionality. Please make sure
that the sauna is properly grounded. Serious injury may result if the proper electrical requirements
are not me
t.
WARNING!
Keep the sauna away from any potential hazards, including any water source or liquids.
Select a dry, suitable location for sauna installation. Do not expose the heater elements to any water
source or liquids as it may cause electrical shock. Should you have any questions, please do not
hesitate to contact the supplier.
Power Plugs
Please read the following directions carefully
.
Power Usage/AMPS
Wattage: 2650w
Voltage: 110/120 Volt
Near/Mid IR Wavelengths: 0 to 5
Far IR Wavelengths: 6 to 12
Amperage: 20 Amp
Plug: NEMA 5-20p
3
