Sauna Assembly: Connecting the Panels. Panel
Locking Systems
Each sauna offers two types of panel-locking systems to connect the different sides of the sauna.
Please use the instructions below as a reference guide on how to connect the sauna panels.
Inner-Locking System:
The inner-locking system is designed to be completely invisible when the sauna is installed. The locks
are built on the side of each panel and they connect by sliding one over the other (Figure G-2).
To connect two panels, follow these few steps:
Figure G-1: Connect panels, inner
lock system
1.
Lift the panel with the male locks a few inches.
2.
Push it against the opposite panel; make sure to
apply pressure around the top and bottom
corners.
3.
Slide the panel down to lock it in place. Make sure
all the locks are connected (top and bottom).
4.
Inspect the panels and make sure they are leveled
(the panel's top is flat and matching).
Figure G-2: Inner-Locking System
9
