make sure that the sauna is properly grounded. Serious injury may result if the proper electrical
requirements are not me
t.
WARNING!
Keep the sauna away from any potential hazards, including any water source or liquids
(for Infrared heaters, pouring water over Harvia heater is allowed). Select a dry, suitable location for
sauna installation. Do not expose the heater elements to any water source or liquids as it may cause
electrical shock. Should you have any questions, please do not hesitate to contact the supplier.
Power Plugs
Please read the following directions carefully
.
There are 2 cords for each heating technology that are located
behind the back wall, on the lower left hand side corner of the back wall, when facing the sauna.
Infrared Heating Technology requires: Plug.
Traditional Heating Technology requires: Hardwire.
Hardwire is recommended, if you opt for a plug.
Sapphire - 3/ Diamond - 3
Infrared Heating Technology requires: Plug
Power Usage/AMPS
Wattage: 2350 W
Voltage: 220/240 Volt
Near/Mid IR Wavelengths: 0 to 5
Far IR Wavelengths: 6 to 12
Amperage: 20 Amp
minimum, 30 amp recommended*
Plug: NEMA 6-20p
Traditional Heating Technology requires: Hardwire.
Hardwire is recommended, if you opt to a plug, we will send you the following plug for the BC45-E heater:
4